|
Installation Instructions for Fire Fyter Wall
Safes
WS-DIY-C and WS-DIY-E The WS-DIY wall safe can be mounted in either a wall or a
floor.
Only tools needed are a drill with a 1/8" drill bit
for drilling bolt hole pilots and a wrench. Supplied
mounting hardware consists of 3 one-way bolts.
| Wall
Installation 1. Pick your
location to mount your safe. Locate between 2 studs. Safe depth is 15.75
--- be sure your site is deep enough for safe or you won't mind it
protruding through wall |
|
| 2. Layout and cut a hole
14.5" wide by 13" high between and along the studs. |
|
| 3. For added strength, 2 x
4 headers may be attached to the top and bottom of the opening.
|
|
| 4. Insert safe in opening with the hinges positioned to
the right hand side |
|
| 5. Drill 1/8" pilot holes and secure safe to studs
using 3 supplied one way screws |
|
| Floor Installation
1. Locate site of
floor installation between floor joists. Safe depth is 15.75" -
Ensure selected site has sufficient clearance for safe body.
|
|
| 2. Layout and cut a hole 14.5" wide by 13"
high between joists into sub-floor. |
|
| 3. For added strength, 2 x 4 cross members can be added
between joists. (This step is optional as the sub floor adequately
supports the weight of the safe) |
|
| 4. Insert
safe in opening with the hinges positioned to the right hand side.
|
|
| 5. Drill 1/8" pilot holes and secure safe to studs
using 3 supplied one way screws.
|
|
For trouble shooting, call
FireFyter
1-800-377-7736
|
|
